Beava Unique Metal Trims
Beava Unique Metal Trims
Made from anodised aluminium, the Unique trim creates a stunning finishing edge for any tiling, especially with its perfectly fitting corners. Creates a luxury finish for all tiling.
Features:
Bright Silver
Stock Code | Trim Type | Bulk Quantity |
42000 | Bright Silver 9.5mm | 50 |
42001 | Bright Silver 12.5mm | 50 |
Brushed Silver
Stock Code | Trim Type | Bulk Quantity |
42040 | Standard Brushed 9.5mm | 50 |
42041 | Standard Brushed 12.5mm | 50 |
Metal Unique Trims
Anodised aluminium
To ensure our trims dont scratch, all our trims are sold with a protective plastic layer which can be peeled off after grouting your tiles
For any size tile you need to ensure that you have at least 1mm space for adhesive. This means for a 10mm tile you would need a 12/12.5mm trim.
Sample Form
To find out where your nearest stockist is, just drop us a message in the live chat portal at the bottom right of your screen. We'll get someone on your case right away, and they'll be able to find the retailer closest to you who stock exactly what you need. Our live chat function is open during STS working hours, from 7.00am until 5.00pm Monday through to Friday.
Aluminium AA 6063 T6 / UNS A96063 anodised to DIN 17611 | |
Si % | 0.2-0.6 |
Fe % | 0.35 |
Cu % | 0.1 |
Mn % | 0.1 |
Mg % | 0.45-0.9 |
Zn % | 0.1 |
Ti % | 0.1 |
Cr % | 0.1 |
Al | Balance |
Installation Guide
- Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
- Press the perforated anchoring leg of the trim into the tile adhesive and align, mechanical fix if required.
- Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
- Fill the joint completely with grout.