Listello Classic Trims
Listello Classic Trims
Sleek and streamlined Listellos are made from anodised aluminium, the Listello trim produces a clean, minimalist finish.
Features:
Space Series Classic Corner Trims
Listello Trims
Stock Code | Trim Type | Bulk Quantity |
41020 | Classic Listello Bright Silver 9.5mm | 50 |
41021 | Classic Listello Bright Silver 29mm | 25 |
41024 | Classic Listello Brushed Silver 9.5mm | 50 |
Our Listello trims are made from anodised aluminium
To ensure our trims dont scratch, all our trims are sold with a protective plastic layer which can be peeled off after grouting your tiles
For any size tile you need to ensure that you have at least 1mm space for adhesive. This means for a 10mm tile you would need a 12/12.5mm trim.
Corners not only improve the aesthetics of the trim on a 90 degree angle, but also act as a health and safety measure ensuring you dont have any sharp edges sticking out that people can catch themselves on.
Sample Form
Aluminium AA 6063 T6 / UNS A96063 anodised to DIN 17611 | |
Si % | 0.2-0.6 |
Fe % | 0.35 |
Cu % | 0.1 |
Mn % | 0.1 |
Mg % | 0.45-0.9 |
Zn % | 0.1 |
Ti % | 0.1 |
Cr % | 0.1 |
Al | Balance |
Installation Guide
- Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
- Press the perforated anchoring leg of the trim into the tile adhesive and align, mechanical fix if required.
- Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
- Fill the joint completely with grout.