Beava Metal Unique Corner Trims

Beava Metal Unique Corner Trims

£0.00

Made from anodised aluminium, the Unique trim creates a stunning finishing edge for any tiling, especially with its perfectly fitting corners. Creates a luxury finish for all tiling.

Color:
Size:
Quantity:
Add To Cart

Features:

Bright Silver


42020 Bright Silver 9.5mm Corners - Pair 50
42021 Bright Silver 12.5mm Corners - Pair 50


Brushed Silver


42042 Standard Brushed 9.5mm Corners - Pair 50
42044 Standard Brushed 12.5mm Corners - Pair 50

Space Series Unique Corner Trims

Anodised aluminium

To ensure our trims dont scratch, all our trims are sold with a protective plastic layer which can be peeled off after grouting your tiles

For any size tile you need to ensure that you have at least 1mm space for adhesive. This means for a 10mm tile you would need a 12/12.5mm trim.

Corners not only improve the aesthetics of the trim on a 90 degree angle, but also act as a health and safety measure ensuring you dont have any sharp edges sticking out that people can catch themselves on.

Sample Form


Si % 0.2-0.6
Fe % 0.35
Cu % 0.1
Mn % 0.1
Mg % 0.45-0.9
Zn % 0.1
Ti % 0.1
Cr % 0.1
Al Balance

Installation Guide

  1. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
  2. Press the perforated anchoring leg of the trim into the tile adhesive and align, mechanical fix if required.
  3. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
  4. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
  5. Fill the joint completely with grout.

To find out where your nearest stockist is, just drop us a message in the live chat portal at the bottom right of your screen. We'll get someone on your case right away, and they'll be able to find the retailer closest to you who stock exactly what you need.