Beava Deluxe Metal Corner Trims
Beava Deluxe Metal Corner Trims
Deluxe corner pieces matching the deluxe trims.
Made from anodised aluminium
Packaged in twos.
Features:
Deluxe Metal Trims
Stock Code | Trim Type | Bulk Quantity |
43001 | Deluxe Bright Silver 8mm | 100 |
43002 | Deluxe Bright Silver 10mm | 100 |
43003 | Deluxe Bright Silver 12mm | 100 |
Space Series Unique Corner Trims
Aluminium AA 6063 T6 / UNS A96063 anodised to DIN 17611 | |
Si % | 0.2-0.6 |
Fe % | 0.35 |
Cu % | 0.1 |
Mn % | 0.1 |
Mg % | 0.45-0.9 |
Zn % | 0.1 |
Ti % | 0.1 |
Cr % | 0.1 |
Al | Balance |
Installation Guide
- Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
- Press the perforated anchoring leg of the trim into the tile adhesive and align, mechanical fix if required.
- Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
- Fill the joint completely with grout.
High quality powder coated aluminium
To ensure our trims dont scratch, all our trims are sold with a protective plastic layer which can be peeled off after grouting your tiles
For any size tile you need to ensure that you have at least 1mm space for adhesive. This means for a 10mm tile you would need a 12/12.5mm trim.
Corners not only improve the aesthetics of the trim on a 90 degree angle, but also act as a health and safety measure ensuring you dont have any sharp edges sticking out that people can catch themselves on.
Sample Form
To find out where your nearest stockist is, just drop us a message in the live chat portal at the bottom right of your screen. We'll get someone on your case right away, and they'll be able to find the retailer closest to you who stock exactly what you need. Our live chat function is open during STS working hours, from 7.00am until 5.00pm Monday through to Friday.