Regular adhesives as specified by the supplier of the luxury vinyl tiles will work well. For confirmation or recommendation, have a look at the F.Ball test report here:

TS12900 01 November 2016
From: B. Johnson To: Mr. S.A. Boulton

Specialist Tiling Supplies (STS)

1. Introduction

Following contact with Steve Boulton, Mr. Eddie Burrowes, Managing Director of Specialist Tiling Supplies has supplied a sample of No More Ply (6mm), a solid cement particle board, for assessment. They have reportedly requested assessment as a base for the installation of LVT’s with F. Ball adhesives.

2. Experimental

The following adhesives were used to prepare ~300mm x 250mm subjective peel bonds to No More Ply, primed with dilute Stopgap P131:

Styccobond F44 Styccobond F46 Styccobond F48 Styccobond F49

The bonds were assessed after 7 days.

3. Results

Styccobond F44 – very good bond, adhesion failure to flooring Styccobond F46 – very good bond, adhesion failure to flooring Styccobond F48 – very good bond, failure tends to be between P131 and No More Ply Styccobond F49 – very good bond, failure tends to be between P131 and No More Ply

4. Conclusion

All of the adhesives tested, F44, F46, F48 and F49, are suitable for use with LVT’s over the supplied 6mm No More Ply.